CGDI Prog BMW MSV80 Key Programmer for BMW

Description

CGDI BMW Support Module list:

1. BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, key all lost matching, CAS computer replace, CAS3+/P4X above version can directly downgrade by OBD in 5 minus
2. BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3. Support BMW key inspection,can check key what status in.
4. Support BMW engine computer DME replacement.
5. Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exciusively support in Domestic
6. Support BMW Key unlock.

Regarding BMW Key Matching Function:

1. Read Key Information: Read out the anti-theft information and key information of the vehicle, such as VIN, Anti-theft version, Remote control frequency, Key number, key ID, key type, and key position status.
2. Generate Dealer Key: After selecting the blank key bit, click this function to match the new key.
3. Synchronous ELV: When the steering wheel lock fails; when the key is matched, the car cannot start.
4. Synchronize DME: When the key is matched, the car cannot be started. Please execute this function to synchronize the DME and CAS system.
5. Restore Key Bit: When this key bit is used, it can be initialized.
6. Unlock Key: restore the key to a brand new state, which can be used again.
7. Disable Key: When the owner’s key is lost, the relevant key bit can be shielded so that it no longer works on the vehicle.
8. Enable Key: enable the disabled key bit to make the key work on the vehicle again.
9. Mileage Reset: The device can read the mileage information of the anti-theft module, and execute this function to make the mileage become 0.
10. Exit shipping Mode: When the vehicle is diagnosed with this fault code, please execute this function to eliminate the fault code and return the vehicle to normal.
11. Recovery Code: After the car is matched with a new key, there is a failure of no coding file, this function can be used to restore the original coding file.
12. Replace FEM/BDC/CAS4: When the car module is faulty, use this function to help the vehicle replace the module.
13. Backup FAFP: Applicable to BMW FEM/BDC modules, backup original FAFP files.
14. Restore FAFP: Applicable to BMW FEM/BDC module, write the required FAFP file.
15. Reset Starter Lock: After replacing the BMW FEM/BDC module, the vehicle does not start, please execute this function.
16. Remote Key Repair: When the EEPROM chip on the BMW FEM/BDC module is damaged or the data is lost, causing the key to fail, you can use this function to repair the original car key.

CGDI BMW Support Key Matching List: (Keep Updating)

BMW 1 Series: E81, E82, E87, E88, F20, F21, F52, F40
BMW 2 Series: F22, F23, F44, F45, F46
BMW 3 Series: E36, E46, E90, E91, E92, E93, F30, F31, F34, F35
BMW 4 Series: F32, F33, F36
BMW 5 Series: E34, E39, E60, E61, F07, F10, F11, F18
BMW 6 Series: E63, E64, F06, F12, F13
BMW 7 Series: E38, E65, E66, F01, F02, F03, F04
BMW 8 Series: E31
BMW X1: E84, F48, F49
BMW X2: F39
BMW X3: E83, F25
BMW X4: F26
BMW X5: E53, E70, F15
BMW X6: E71, E72, F16
BMW M2: F87
BMW M3: E90, E92, E93, F80
BMW M4: F82, F83
BMW M5: E60, F10, F90
BMW M6: E63, E64, F06, F12, F13
BMW M8: F91, F92
BMW X3 M: F97
BMW X4 M: F98
BMW X5 M: E70, F85, F95
BMW X6 M: F94
BMW Z3: E36, E37
BMW Z4: E85, E86, E89
BMW Z8: E52
BMW MINI: R50, R52, R53, R54, R55, R56, R57, R58, R60, R61, F54, F55, F56, F60
Porsche: 911, Boxster987

CGDI Prog BMW MSV80 Package includes:

1pc x CGDI Prog BMW MSV80 Main Unit
1pc x USB Line
1pc x OBD Connection Line
1pc x Reading 8 Foot Chip Free Clip Adapter
1pc x Carton Box